Home >Support
VPCC US110 Thin Client
VPCC US110 Thin Client
(click picture to enlarge)
Specifications overview
Specification overview NEC VPCC US110
Processor ServerEngines NetClient SoC
400 Mhz
RAM 128 Mb
Speed : DDR2 533
Flash Memory: 2Mb

Video Graphic chipset : NetClient Embedded (Matrox G200)
Video Accelerations : Mpeg 1 and 2, Applications based on DirectShow, WMP
Resolution : VGA (640x480), SVGA (800x600), XGA (1024x768)
SXGA (1280x1024), UXGA (1600x1200)
External resolutions : up to 1920 x 1200, up to 85Hz
Network Autosensing, 10/100/1000 Ethernet RJ45
VOIP : Management of the VOIP
Quality of service (QOS)
available with the NEC solution Virtual PC Center
I/O Ports USB : 4x USB 2.0
DC in : 1 (rear)
Audio Jack : Audio out / Mic in
Modem RJ-11 : 1x (rear)
LAN RJ-45 : 1x (rear)
DVI port : 1x (rear)
Infrared : no
TV-Out : no
VGA Adaptor as accessory
Security cable slot
Audio Audio Chipset : NetClient Embedded DSP
Mic In : 1 jack 3.5mm
Audio Out : 1 jack 3.5mm
Decoding : MP3, AAC & AC3
Physical Specifications Dimensions (H x W x D) : 34 x 155 x 104 mm
Weight : 370g
Operating Constraints : +5C to +35C
Operating Humidity : 20-80% non-condensing
Power Requirements Typical usage : 8,5 - 10 W
Maximum 13 W
100-240 V CA, 50-60 Hz
Options Authentification SmartCard Reader
Monitor mount
SmartCard Reader
Operating System Linux Based Operating System
Installed Applications Client Citrix ICA 5.2
Client Microsoft RDP 8.0
Client VOIP : IP Phone Software SP30 (Option)
Peripheral Support USB SmartCard Support
(May require additionnal drivers from manufacturer)
Management Device Manager
Safety Certifications FCC, CE
Recycling Certifications WEEE
Warranty Standard Warranty : 3 Years exchange On Site D+10